Tuesday 7 April 2015

How to Shorten Trousers Tutorial

I have had a pair of trousers in my wardrobe that have gone unworn because they are only the right length if I am wearing very high heels. Now I hardly ever wear heels now as I would rather be able to walk so this was the ideal opportunity to show how to shorten a pair of trousers.  You have to decide though if you are a woman what shoes you will be wearing your trousers with as this can make a lot of difference to how they look. Too short and you will not be able to wear with heels and too long and you can only wear with heels!  Men do not have this trouble ( well mostly they don't) so really you have to choose which type of heel size they will be worn with and then try them on.
If  you have other trousers that are the perfect length you can skip trying them on and work from that pair. If this is the case simply lay out the good fitting trousers, put the new ones on top (making sure everything is lined up) and mark the new finish line with a line of pins on the new trousers. Also be sure they fit correctly at the waist because if they are drooping due to being loose this will affect the hemline.
Now if you don't have a pair that are the exact right length or you have new shoes that you will be wearing these trousers with here is what you do.

Try on the trousers with the shoes and get a friend or family member to help you turn up one leg and pin. This may take a bit of trial and error but don't try to do it yourself because as you tip forward you are changing the hem length. You only really need to get one leg done then you can take them off.

Next lay them out on a flat surface and take up the other leg to match, once you are happy they are the same you are going to place a line of pins along the bottom of the fold, this is your finished length.
You can now take the other pins out ( the ones that are holding up the hem) and let the hem fall back down.

This is what it will look like now, as you can see mine are being shortened by quite a lot. The line of pins will be your finished length.

Next you want to cut away the excess, if it is a lot you can cut it straight off like I do here...

If it is only a small amount you will need to unpick the existing hem first and iron that down before cutting away the excess. I usually do a hem of about 1 1/2 -2inch.

You will want to finish this raw edge so either over lock or zig zag stitch, I used a zig zag on number 7.

Now you need to fold back your hem so that the pins are at the bottom of the fold...
If you need to add more pins once you have folded it to keep your fold in place but don't confuse them with your original line, this line ensures your hem is nice and straight as you hand stitch.

Yes, you are going to hand stitch the hem, some canvas trousers and of course jeans have a machine hem but dress trousers usually need an invisible hem.  There are fancy machines like the ones used in factories that give an invisible machine hem, but they can't be that good or why would hems on store bought trousers always be coming down?


Right make a good knot and hide it under the turned up fabric, do a few stitches there on top so it is secure. Now put your needle through only catching some of the fabric on the wrong side ( don't go right through) angle your needle to the left and come up through the hem as in the picture above. I am right handed so I work right to left, if you are left handed just reverse it. Pull the needle all the way through now and repeat all the way around the hem taking care not to pucker and keep the stitches even. Finish with a good knot, what I tend to do is push the needle through like in the picture above then wrap the cotton around the end of the needle a couple of times then pull it right through and that gives a good strong knot. 

When finished all your stitching will be invisible, they now just need pressing to make the hem crisp. Either do this on the wrong side or put a piece of cotton over the top to stop them going shiny.

I hope this has inspired a few people to have a go and was not too confusing, I often get asked by friends and family to shorten trousers so I know this is a common problem for many people. Don't be discouraged if your hand sewing is slow at first, just take your time, you will get quicker.

5 comments:

  1. Thanks for the tutorial, I hadn't thought to zig zag it,will do that next time. I have been known to staple up jeans in my youth!

    ReplyDelete
  2. I just wanted to say how much I enjoy your blog.
    I read every post and always like them very much, interesting and you write so well.
    I do not comment enough and I will try to do better!
    Many thanks for sharing.
    Pam in TX

    ReplyDelete
    Replies
    1. Thanks Pam for your kind comments, I'm glad you like it. It is always good to read comments and I hope some of what I write is useful to you. xx

      Delete
  3. Hoping that you post again soon.
    I miss peeping into your world.
    Have a nice Bank Holiday weekend.
    Pam in TX.xx

    ReplyDelete
  4. Hello Pam, April has flown by and has been so busy. I will be updating later today. xx

    ReplyDelete

I love to read all comments. Please feel free to let me know what kind of posts you prefer.

A Slow Week, A few Books and Pretty PJs

 Hello everyone, I hope you are all doing well.  So this week has been brought to a bit of a standstill for me.  I have somehow injured my b...